Wireless mud density sensor for mud logging unit

PRODUCT INTRODUCTION

The density sensor uses the differential pressure principle to measure the density of the drilling fluid.When the sensor is placed vertically in the drilling fluid, the pressure on the surface of the two pressure sensors is different because the depth of the two pressure sensors is different in the drilling fluid, and the distance between the two pressure sensors is a constant, so their difference The pressure is linear with the density of the liquid.

 

PRODUCT SPECIFICATION

Measuring range: 0~3g/cm3

Accuracy: ±1%

FS Supply voltage: 3.5-5VDC

Output signal: 0.5-2.5V

Full level: IEC EEX iaII CT6

Working temperature: -20~70°C

Protection level: IP67

 

PRODUCT FEATURE AND APPLICATION

The differential pressure type density sensor can be widely used in industrial fields such as on-site pipelines, open or closed storage tanks, and can continuously and in real-time measure the liquid density of pipelines or tanks.

 

PRODUCT DETAILS

The sensor antenna and the circuit board are connected by a SAM interface, and the antenna center frequency is 433 MHz, and the antenna and the circuit board are connected by a SAM interface extension cable.

 

PRODUCT QUALIFICATION

All sensors either are EX type or are intrinsically safe. Zone barriers are installed in the Unit. Using well-known brand products at home and abroad, the sensors of mud logging unit have the advantage of technical and performance indicators. At the same time, the service life is long.

 

DELIVERY SHIPPING AND SERVICES

CNPS can ship the goods to you by Express, Air, or sea .

 

FAQ

1.Why do you choose our company?

We are trading company, founded a perfect oil and gas equipment product supply chain. We have worked in the oil industry for about 10 years(follow ISO9001 standard).We will checked our mill every months to make sure their quality. The after-service are charged by ourselves.So we can reply any problem within 24 hours.

 

2. How can you guanranty your quality?

Every time we will inspect our factories first. This inspect will include the persons, the present products, their scale etc. If everything is ok, we will start to cooperate. During cooperation, we will go to the factories to test the products to guanranty the products has good quality. If it doesn’t meet our requirement, the goods will be refused.

 

3. Do you have price advantage?

For us, the quality is our first consideration. And the second consideration is the price. We couldn’t say we have the lower price, because of quality issue. We need to say we have the best price.

 

4. How long do you do the export business?

For our sales persons, they have 8-10years experience to do the international business. They understand each step for the export and do good service for each of our clients.