Quartz Pressure Single

Quartz Pressure Single The CNPS Quartz Pressure Tool uses an industry standard precision quartz crystal pressure transducer. The tool measures pressure and gauge temperature.



Wellbore pressure is transmitted through an isolating metal bellows to a volume of silicone oil which surrounds the quartz pressure crystal. Changes in hydrostatic pressure alter the resonant frequency. A second crystal, not subjected to external pressure, provides temperature compensation and allows calculation of precision, high resolution, pressures.


Draw-Down and Build-Up Pressure Transient Analysis.

• Down-Hole Pressure Gradient Measurement. INTERFACING & TOOL COMBINATIONS Mbus, SRO (surface readout) or Ultrawire™ Mbus QPS interfaces direct to MPL, XMW and XSH telemetry tools It may be used for memory or SRO logging. SRO QPS may be placed anywhere in the string and can combine with a second Ultrawire QPS may be placed anywhere in the string and can combine with other It may be used for memory or SRO logging. Sondex Compatible and OPTIONS Ultrawire ™ toolbus (UW) or Memory toolbus (Mbus) Slickline memory or surface readout mode (with suitable telemetry controller)


QPS Telemetry XTU or UMT

Pressure(max) 105MPa

Temperature(max) 177°C

Measurement Range 0 – 15000 psi

Resolution 0.008psi & <0.005 Deg C

Accuracy ±0.02%

Linearity <0.01% FS

Repeatability <0.01% FS

Hysteresis <0.01% FS

Drift Less than 3psi per year

Voltage(nominal) 18VDC

Current <20mA

Length 482mm

Measure Point 74mm

Diameter 43mm

Weight 4kg

Material Corrosion Resistance

Throughout End Thread(top/bottom) 13/16″ 12 UN2A

GO End connector(top/bottom) 4mm single banana connector.

Weight 1 kg


There are no reviews yet.

Be the first to review “Quartz Pressure Single”

Your email address will not be published. Required fields are marked *