,

Sludge registration pump stroke sensor

Mud recording sensor called Pump Stroke Sensor Pump stroke sensor is designed to measure the working speed of mud pump. Electric proximity switch and two-wire system are adopted in this equipment.

PRODUCT INTRODUCTION

In addition to being used in mud logging, this proximity sensor is also suitable for various controls, such as machine limit, detection, counting, speed measurement, liquid level signal, automatic protection, etc It is widely used in machinery, mining, metallurgy, plastics, textile, chemical industry, light industry. , tobacco, electricity, railways, army and other departments.

PRODUCT SPECIFICATIONS

Working temperature: -25 ~ 70 ℃

Rated working voltage: 5~30VDC

Maximum output current: 200mA

Effective action distance: ≤30mm

The highest working frequency: 100Hz

PRODUCT FEATURE AND APPLICATION

The pump stroke sensor is an inductive proximity switch sensor used in the oil field to measure the speed of the pump or rotating platform. It has a wide range of supply voltage, high repeatability, fast frequency response, long service life, vibration resistance, corrosion resistance and waterproof, with polarity and short circuit protection.

PRODUCT DETAILS

1.The pumping sensor can be fixed to the mud pump head by the bracket, or the appropriate part of the rotating platform, and the closest distance between the position of the sensing surface of the measured object and the end surface of the sensor It is 30mm. (According to the influence of the use environment, the nominal working distance is usually taken. 80%), plus the working voltage, when the end of the inductive sports sensor is close, the indicator light turns on; When you move away from the sensor, the indicator turns off.

2.The turntable speed sensor can be fixed to the appropriate part of the turntable drive shaft with the bracket. It should be convenient to install and repair. The drill model is selected. A piece of iron with a length and width of 30 mm is welded onto the transmission shaft or airbag clutch. The position of the end face should be close to the end face of the sensor. Adjust the sensor fixing nut so that the distance between the sensor iron is within the effective range of the working distance.

PRODUCT QUALIFICATION

All sensors are type EX or intrinsically safe. Zone barriers are installed in the Unit. Using well-known brand products at home and abroad, the mud logging unit sensors have the advantage of technical and performance indicators. At the same time, the service life is long.

SHIPPING AND DELIVERY SERVICES

CNPS can send the merchandise to you by express, air or sea shipping.

FREQUENT QUESTIONS

1.Why choose our company?

We are a trading company that has founded a perfect oil and gas products supply chain. We have been working in the oil industry for about 10 years (following the ISO9001 standard). After-sales service is handled by ourselves, so we can respond to any problem within 24 hours.

2. How can you guarantee your quality?

Every time we will inspect our factories first. This inspection will include the people, the current products, their scale, etc. If everything is fine, we will start to cooperate. During the cooperation, we will go to the factories to test the products to ensure that the products have good quality. If you do not meet our requirements, the goods will be rejected.

3. Do you have price advantage?

For us, quality is our first consideration. And the second consideration is the price. We could not say that we have the lowest price, for quality reasons. We have to say that we have the best price.

4. How long do you spend exporting?

Our sellers have between 8 and 10 years of experience in international business. They understand each step for export and provide good service for each of our clients.

Weight 3 kg

Reviews

There are no reviews yet.

Be the first to review “Sludge registration pump stroke sensor”

Your email address will not be published. Required fields are marked *